FR
8. TROUBLE SHOOTING
ES
DANGER! Risk of injury due to electric shock.
PT
Warning! Before any trouble shooting, switch off the tiller.
IT
problems
EL
PL
Product does not start.
RU
KZ
UA
Product does not reach full
power.
RO
EN
Unsatisfactory result.
Excessive vibration or
noise.
Tiller suddenly stopped
while working.
9. DISPOSAL AND RECYCLING
Not connected to power
supply .
Power cord or plug is
defective.
Other electrical defect to
the product.
Power source has too low
voltage.
Tines are dull/damaged. Replace with new one.
Tines not suitable for
ground material.
Tines are dull/damaged. Replace with new one.
Bolts/nuts are loose.
Tiller may occur overload
protection.
The product comes in a package that protects it against damage during shipping.
Keep the package until you are sure that all parts have been delivered and the
product is function properly. Recycle the package afterwards.
WEEE symbol. Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local authority or
local store for recycling advice.
Probable causes
272
Corrective action
Connect to power supply.
Check by a specialist
electrician.
Check by a specialist
electrician.
Connect to another power
source.
Use product only on
suitable ground.
Tighten bolts/nuts.
Stop the tiller and wait for
3 minutes to restart.