STERWINS A061003 Manual De Instrucciones página 263

FR
1. SAFETY INSTRUCTIONS
ES
engine.
PT
Start the motor carefully according to manufacturer instructions
and with feet well away from the tool(s).
IT
Do not use this machine on land that may damage the blade.
Do not put your hands or feet near or under rotating parts.
EL
Holding points which allow machine to be handled.
PL
Never pick up or carry a product while the motor is running.
Never operate the appliance with defective guards or shields, or
RU
without safety devices, for example deflectors and/or catchers in
place.
KZ
Stop the machine, and disconnect it from the power supply. Make
UA
sure that all moving parts have come to a complete stop before
clearing blockages or unclogging chute; before checking, cleaning
RO
or working on the machine; after striking a foreign object. Inspect
the machine for damage and make repairs before restarting and
EN
operating the machine; whenever you leave the machine.
During the operation of the machine safety shoe should be worn.
If the machine starts to vibrate abnormally (check immediately)
inspect for damage; check for and tighten any loose parts; replace
or repair any damaged parts.
Follow the maintenance and repair instructions for this product.
Never carry out any modifications of the product. Information
about maintenance and repair is provided in this user manual.
Keep all nuts, bolts, and screws tight to be sure the appliance is in
safe working condition.
Replace worn or damaged parts for safety.
On machines with multi blade,take care as rotating one blade can
cause other blades to rotate.
Be careful during adjustment of the machine to prevent
entrapment of the fingers between moving blades and fixed parts
260