diversey TASKI ULTIMAXX 1900 Manual De Instrucciones página 9

Safety measures to be taken when handling
batteries
Batteries contain acid. Always wear safety goggles
when performing maintenance, installing, or remov-
ing wet battery sets.
Rinse acid splashes in your eyes or on your skin with
plenty of clear water. Then immediately consult a
doctor. Wash your clothes with water!
Charging batteries creates a dangerous gas mixture.
Keep away from open fire or glowing embers.
Do not smoke!
Danger of acid burns!
Attention! The battery poles are always energized,
therefore do not place any objects on the batteries!
The supply terminals are not to be short-circuited!
Caution:
Keep batteries clean and dry. Immediately wipe off
leaking acid or water.
- Wear protective gloves for this purpose.
Caution:
Batteries may only be installed by service agencies
or experts approved by Diversey; they must be in-
stalled in compliance with the connection diagram.
Installation and/or connection errors may result in se-
vere injury, explosion and major damage to the ma-
chine and the environment.
Caution:
Ensure adequate ventilation when charging the bat-
tery.
Notice:
The product safety data sheet provided by the bat-
tery manufacturer must be observed.
Notice:
The operating instructions provided by the battery
manufacturer must be met.
Caution:
Always disconnect the batteries from the machine
before starting maintenance work.
Battery connection diagram
ULTIMAXX 1900 (Gel)
Mains
Power Board
Battery
plug
Charger
external
Mains
ULTIMAXX 2900 (Gel)
Mains
black
Power Board
12 V
Charger
external
Mains
ULTIMAXX 1900 (Lithium)
Mains
Power Board
Battery
plug
Charger
external
Mains
Charger
internal
Drive direction
Forward
black
12 V 12 V
red
Charger
internal
Drive direction
Forward
12 V 12 V
red
Charger
internal
Drive direction
Forward
black
25.6 V
red
12 V
7