Intended Use; Technical Data - EINHELL TC-ID 18 Li Manual De Instrucciones

•
Cordless Hammer Drill
•
Depth stop
•
Original operating instruction with safety
information
Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.

3. Intended use

The hammer drill is designed for drilling holes
into wood, iron and non-ferrous metals, and for
hammer drilling in stone, using the appropriate
bits.
The equipment is not designed for tightening
screws of any kind.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Anl_TC_ID_18_Li_SPK7_USA.indb 10 Anl_TC_ID_18_Li_SPK7_USA.indb 10
EN

4. Technical data

Motor power supply: ............................18 V
No-load speed: .................... 0-2600 RPM (min
Clockwise/counter-clockwise: ........................yes
Clamping range
of drill chuck: ............................ max. ½'' (13 mm)
Impact Speed: ....................................41600 BPM
Drilling capacity:
Concrete : ........................................ ½'' (13 mm)
Metal: ................................................ ⅜'' (10 mm)
Wood: .................................................1'' (25 mm)
Weight (Tool only): ........................ 3.5 lbs (1.6 kg)
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's con-struction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Limit the operating time.
All stages of the operating cycle must be
considered (for example, times in which the
electric tools are switched off and times in which
the tool is switched on but operates without load).
- 10 -
)
-1
22.04.2022 11:04:17 22.04.2022 11:04:17