Layout And Items Supplied - EINHELL TC-ID 18 Li Manual De Instrucciones

or Rechargeable (Nickel Cadmium, Nickel
Metal Hydride, or Lithium-Ion) batteries.
6. Do not dispose of batteries in fi re.
7. Batteries should be recycled or disposed of
as per state, provincial and local guidelines.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fi res.
Safety information for hammer drills
1) Safety instructions for all operations
a) Wear ear protection when hammer
drilling. Exposure to noise can cause
hearing loss.
b) Use the auxiliary handle(s). Loss of control
can cause personal injury.
c) Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring or its own
cord. Cutting accessory or fasteners
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
Safety Instruction when using long drill bits
a) Never operate at higher speed that the
maximum speed rating of the drill bit.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
b) Always start drilling at low speed and
with the bit tip in contact with the
workpiece. At higher speeds, the bit is likely
to bend if allowed to rotate freely without
contacting the workpiece, resulting in
personal injury.
c) Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of
control, resulting in personal injury.
SAVE THESE INSTRUCTIONS
Explanation of the symbols used (see Fig. 10)
1. Danger! - Read the operating instructions to
reduce the risk of injury.
2. Caution! Wear ear-muff s. The impact of
noise can cause damage to hearing.
3. Caution! Wear a breathing mask. Dust
which is injurious to health can be generated
when working on wood and other materials.
Anl_TC_ID_18_Li_SPK7_USA.indb 9 Anl_TC_ID_18_Li_SPK7_USA.indb 9
EN
Never use the device to work on any
materials containing asbestos!
4. Caution! Wear safety goggles. Sparks
generated during working or splinters, chips
and dust emitted by the device can cause
loss of sight.
5. To avoid damaging the gearbox, the drill /
hammer drill selector switch should only be
moved when the machine is at a standstill.
6. Store the batteries only in dry rooms with an
ambient temperature of 50°F to 104°F (+10°C
to +40°C). Place only fully charged batteries
in storage (charged at least 40%).

2. Layout and items supplied

2.1 Layout
1. Quick-change drill chuck
2. Depth stop
3. Drill/hammer drill selector switch
4. Lock button
5. On/Off switch
6. Changeover switch
7. Additional handle
8. Pushlock button
9. Battery capacity indicator
10. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
- 9 -
22.04.2022 11:04:17 22.04.2022 11:04:17