Safety Warnings For Using Texture Guns - Truper PITI-687 Manual De Instrucciones

Substances and materials
CAUTION • The equipment's design is for applying
covering materials such as paint, varnish, enamel, etc., with
an ignition point not lower to 70 °F. See the product label
in the can or container.
• Do not spray substances with which
WARNING
you are not familiar and not know the potential dangers.
WARNING • Do not spray flammable substances.
• Be careful of the dangers the spayed substances
originate. Read the text and information in the cans and
containers or the manufacturer specifications.
Before Operating the Equipment
CAUTION • The equipment shall not be used in
closed spaces or in explosive environments.
• If working outside, consider the wind direction. Wind can
carry the covering over long distances and cause damage
as well as making the job very difficult.
CAUTION • If working indoors, verify there is
adequate ventilation.
WARNING • Your work area shall be free of any
ignition source. Do not smoke during spraying or near the
work area.
CAUTION • Wear a mask and safety eyeglasses
when spraying to prevent injuries in lungs and eyes.
• It is advisable to wear gloves and an overall to protect
hands and clothes from the product you are applying.
4 ENGLISH
Safety Warnings for
Using Texture guns
While Operating the Equipment
CAUTION • Never aim the texture gun to paint
against yourself, third parties or animals.
• Double check the equipment is not absorbing any
solvent vapor.
CAUTION • If pausing during the applying process
do not set aside the plastering machine. Support it by the
hook so it stays in a vertical position.
After Operating the Equipment
WARNING
• When finishing the job, clean the
texture gun thoroughly to eliminate any product residues.
Product accumulations may damage the texture gun and
nullify the Warranty.