Recirculation / No Recirculation; Painted - Sagola V 4000 Manual De Instrucciones

40/41

10.3. Recirculation / No recirculation

WHEN YOU HAVE THE V4000 AUTOMATIC PISTOL IN YOUR HANDS, YOU
WILL HAVE TO
SERIES WITH MORE AUTOMATIC SPRAYGUNS OR
In case of use with Recirculation, you will have to put in the Product Outlet (Product In/Out) a
1/4" fitting that comes inside the container and connect it firmly to the product hose.
nº22
DMM/DMR Version
In case of use with NO Recirculation, you will have to put in the Product Outlet (Product In/Out) a
plug (No.23), two supplement discs (No.24) and a bushing (No.25) in the following order:

10.4.- Painted

Paint preparation
Follow the paint manufacturer's instructions and thin the
paint with its proper solvent. Filter it through a nylon strainer.
It is best to prepare the paint relatively thin and make repea-
ted passes across your work to achieve the desired shade.
This will also decrease paint buildup on the needle and de-
crease cleaning time.
DECIDE WHETHER THE PISTOL WILL BE INSTALLED IN
nº23 nº24
Cap
ENGLISH
NOT.
nº35 nº24
QCM/QCR Version
nº25 nº24
nº14