Control Panel - Fender TONE MASTER Princeton Reverb-Amp Manual De Instrucciones

The Tone Master Princeton Reverb amplifier uses massive digital
processing power to achieve a single remarkable sonic feat: faithfully
modeling the circuitry and 12-watt power output of an original
Princeton tube amp. Using a high-performance 50-watt digital
power amp to achieve the headroom and dynamic range of a real
vintage Princeton tube amp, paired with the pronounced sparkle and
clarity of a single Jensen® C10R speaker and a resonant pine cabinet,
the result is tubeless Princeton Reverb tone, volume and dynamics
virtually indistinguishable from the all-tube original. And with all these
features, the Tone Master Princeton Reverb weighs over 40 percent
less than an all-tube Princeton.
A. INPUTS: Connect instrument here. Normal input 1 produces
full sensitivity; normal input 2 has adjusted sensitivity (-6dB)
for slightly darker tone and cleaner response with high-gain
instruments.
B. VOLUME: Controls volume level of both inputs.
C. TREBLE: Controls treble response of both inputs.
D. BASS: Controls bass response of both inputs.
E. REVERB: Controls reverb effect level. No reverb is heard when
control is turned fully counterclockwise. Reverb can also be
turned on and off using included two-button footswitch.
TONE MASTER
®

CONTROL PANEL

PRINCETON REVERB
Front panel features give guitarists a playing experience identical
to the tube version, including Fender's world-standard reverb and
tremolo effects. Additional rear-panel features deliver modern
convenience and flexibility—including an output power selector for
full power and five attenuated settings, balanced XLR line output
with impulse response (IR) cabinet simulations, mute switch for silent
stage or recording use, USB port for firmware upgrades, and more.
Register your Tone Master Princeton Reverb online at start.fender.com.
F. SPEED: Controls "vibrato" (tremolo) effect rate.
G. INTENSITY: Controls "vibrato" (tremolo) effect depth. No effect
is heard when control is turned fully counterclockwise. Effect can
also be turned on and off using included two-button footswitch.
H. POWER JEWEL: Illuminates red when amplifier is on; flashes
between red and amber during warmup. Illuminates amber in
MUTE mode (K).
1
®