Lavorwash SWL R 1000 ET Manual De Instrucciones página 31

SUCTION OFF KNOB: For all models .
Fitted to both models Part. 1 Fig. 6. When this knob is pulled outwards, suction is disengaged. Disengage the
suction every time the filters need shaking or when passing over damp areas (with the motor on).
CENTRE BRUSH ENGAGEMENT LEVER: For all models .
This lever Part. 2 Fig. 6 makes it possible to engage and disengage the centre brush. By sliding the lever down
along the slot, the work position is lowered, while when the lever is slid upwards and inserted in the notch, the
centre brush is disengaged.
1) Gear switch
2) Electric switchboard check led
3) Filter Buzzer Button
4) Acoustic Indicator Button
5) Brushes motor switch
6) Ignition key
7) Working light switch (optional)
8) Charge indicator
9) Hour counter
GEAR SWITCH :
Part. 1 The purpose of the gear switch lever is to move the machine forward or reverse. When the switch is in
forward position (arrow pointing up) by pressing the pedal Part. 3 Fig. 10 the machine moves forward. When
the switch lever is in reverse position (arrow pointing down) by pressing the pedal the machine moves reverse.
For safety reasons, the reverse speed is very low. If the switch is left in central position, the machine
STANDARD FEATURES
SWL R1000 ET/SW R 6200 BT
31