Performing Basic Settings; Setting The Time And Date - Crane AU6-PF-22GA Manual De Usuario

USA
First use

Performing basic settings

After 90 seconds of button inactivity while per-
forming settings, the display will switch back to
the normal time indicator. All settings performed
until then will be saved. In this case, start the
setting process from the beginning.
1. Hold the "MODE" button
until a signal beep sounds once.

Setting the time and date

The seconds will blink.
2. Set the seconds to zero with the "ST./STP." button
"SELECT" button
26
down for approx. 3 seconds
5
.
4
or
2