Changing The Battery - Crane AU6-PF-22GA Manual De Usuario

USA

Changing the battery

Changing the battery
To ensure that your pulse watch is water-tight, it is recom-
mended that you have the batteries changed by a watch
specialist or at our service point. If, however, you would like to
change the battery yourself, proceed as follows:
1. Use a screwdriver to remove the four screws
cover
8
2. Open the battery holder
ing bracket over the locking hook
3. Insert a new CR2032-type 3 V battery
pole (+) facing up.
4. Hook the battery holder back in place.
5. Screw the cover back into place.
82
located on the back of the pulse watch.
by carefully prying the clamp-
11
.
9
10
on the
7
with the positive