Crane AU6-PF-22GA Manual De Usuario página 51

8. To set your upper pulse limit, push the "ST./STP." button
(forward) or "SELECT" button
9. To confirm your selection, push the "MODE" button.
"BELOW ALERT" blinks on the display.
10. To configure whether an alert should sound when you fall
below the lower pulse limit, push the "ST./STP." button or
the "SELECT" button.
11. To confirm your selection, push the "MODE" button.
"ABOVE ALERT" blinks on the display.
12. To configure whether an alert should sound when you
exceed the upper pulse limit, push the "ST./STP." button or
the "SELECT" button.
13. To confirm your selection, push the "MODE" button.
Main modes
(back).
4
USA
2
51