Crane AU6-PF-22GA Manual De Usuario página 60

USA
Main modes
3. To resume the time measurement at the recorded time,
push the "ST./STP." button again.
− To reset the time to zero, stop the stop watch and hold the
"SELECT" button
Recording interim time
1. To start time measurement, push the "ST./STP." button.
2. To show an interim time, push the "SELECT" button.
The "SPLIT" indicator will appear in the upper display
segment.
The stop watch will continue to record while the interim
time is shown on the display.
60
down for approx. 3 seconds.
4