General Information - Calpeda META Instrucciones De Uso

THIS INSTRUCTION MANUAL IS THE PROPERTY
OF CALPEDA S.P.A. ANY REPRODUCTION, EVEN
IF PARTIAL, IS FORBIDDEN
SUMMARY
GENERAL INFORMATION ........................... 13
1.
2. TECHNICAL DESCRIPTION ........................ 14
3. TECHNICAL FEATURES .............................. 14
4. SAFETY ........................................................ 15
5. TRANSPORTATION AND HANDLING ......... 15
6. INSTALLATION ............................................. 15
7. PROGRAMMING GUIDE.............................. 16
8. START-UP AND OPERATION ...................... 17
9. MAINTENANCE ............................................ 18
10. DISPOSAL .................................................... 19
11. SPARE PARTS ............................................. 19
12. ALARMS ....................................................... 20
13. WARNING ..................................................... 20
14. TROUBLESHOOTING .................................. 21
Installation examples .................................... 75
Drawing for dismantling and assembly .................. 77
Declaration of conformity ....................................... 80

1. GENERAL INFORMATION

Before using the product carefully read the warnings
and the instructions contained in this instruction
manual, which should be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language in
case of discrepancies in the translations.
This manual is part of the essential safety requirement
of the appliance and must be retained until the product
is finally de-commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or their
agent, specifying the type of product data shown on
the label of the machine (see 2.3 Marking)
Any changes, tampering or modifications made to the
product or part of it, not authorised by the manufacturer,
will revoke the "CE declaration" and warranty.
This appliance should not be operated
by children younger than 8 years,
people with reduced physical, sensory
or mental capacities, or inexperienced
people who are not familiar with the
product, unless they are given close
supervision or instructions on how to
use it safely and are made aware by a
responsible person of the dangers its
use might entail.
Children must not play with the
appliance.
It is the user's responsibility to clean
and maintain the appliance. Children
should never clean or maintain it
unless they are given supervision.
Do not use in ponds, tanks or swimming
pools or where people may enter or
come into contact with the water.
Read carefully the installation
section which sets forth:
- The maximum
structural
(chapter 3.1).
META_S_Rev6-s11 - Operating Instructions
permissible
working pressure
- The type and section of the
power cable (chapter 6.5).
- The type of electrical protection
to be installed (chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, the
symbols/pictograms indicated
meanings, are used.
Information and warnings that must be
observed, otherwise
be damaged or personnel safety could be
compromised.
Electrical information and warnings that must
be observed, otherwise the machine could
be damaged or personnel safety could be
compromised.
Notes and warnings for the correct management
i
of the machine and its parts.
Operations that can be performed by the final
user. After carefully reading the instructions,
they are responsible for maintenance under
normal conditions. They are authorised to
perform routine maintenance operations.
Operations that must be performed by a
qualified electrician authorised to perform all
electrical maintenance and repair operations
including maintenance. They are able to
operate in the presence of high voltages.
Operations that must be done performed by
a qualified technician capable of using the
appliance correctly under normal conditions,
authorised to
maintenance,
operations.
Indicates that it is mandatory to use personal
protective equipment - hand protection.
Operations that must be performed with the
device switched off and disconnected from the
OFF
power supply.
Operations that must be performed with the
ON
device switched on.
1.2. Manufacturer name and address
Manufacturer name: Calpeda S.p.A.
Address: Via Roggia di Mezzo, 39
36050 Montorso Vicentino - Vicenza / Italia
www.calpeda.it
1.3. Authorised operators
The product is intended for use by expert operators
divided into end users and specialised technicians.
(see the symbols above).
It is forbidden, for the end user, to carry out
i
operations which must be performed only by
specialised technicians. The manufacturer
declines any liability for damage related to the
non-compliance of this warning.
1.4. Warranty
For the product warranty refer to the general terms and
conditions of sale.
The warranty covers only the replacement and
i
the repair of the defective parts of the goods
(recognised by the manufacturer).
below, with
the machine could
perform all mechanical
adjustment and repair
Page 13 / 80
EN
their