American Standard Ovation Curve AM00847400 Manual Del Propietário página 16

9
APPLYING SEALANT ON HINGE COVER PLATE
• In this step, you'll need the following tool: A
9a. Apply Sealant [A] around the Hinge Cover [13] as illustrated.
9b. Line up the 4 studs of the Hinge Cover [13] over the Hinge [13] and snap into place.
10
APPLY SEALANT TO SHOWER DOOR
• In this step, you'll need the following tool: A
A
9a
A
[13]
9b
Hinge
Cover
View from In side
View from In side
Allow 24 hours for silicone to dry before use
10a. Apply a Silicone Sealant [A] to all areas around
the perimeter of the shower door as illustrated.
Allow 24 hours for sealant to dry before using
shower.
Hinge
Cover