Door Panel; Fixed Panel B - American Standard Ovation Curve AM00847400 Manual Del Propietário

4
INSTALLING BOTTOM GASKET AND MAGNETIC SEALS
• In this step, you'll need following parts: [5] x1, [7] x1, [8] x1
• In this step, you'll need the following tools: A, H
4b
4a
4a. Open Door Panel [9] and install Bottom Gasket [5] on bottom of door panel. Note the direction
of the gasket in illustration 4a.
4b. Install Magnetic Seal [7] onto outside edge of Door Panel [9]. Install Magnetic Seal [8] onto outside
of Fixed Panel B [11].
4c. Apply a small amount of silicone on the lower, inside edge of Magnetic Seal [7] and fully push into
Door Panel [9] to hold in place.
4d. Ensure that the Magnetic Seal [7] correctly fits around the Bottom Gasket [5] and does not interfere
with the closer of Door Panel [9].
4e. Trim the excess portion of Magnetic Seal [7] with Utility Knife [H].
4f. Ensure Magnetic Seal [7] fits flush to top of Door Panel [9].
4a
[9]
View from
[5]
Outside
[7]
4c
[9]
[5]
A
4e
[7]
[9]
4b
[7]
[11]
[9]
[8]
4d
[7]
[9]
Shower
[5]
Base
4f
[7]
[9]
H