Optika Italy SZ Serie Manual De Instrucciones página 26

3. Insert the drop preventing ring and fix it at the desired height
by screwing the fixing knob. (Fig. 7)
4. Insert the horizontal arm and secure it with the fixing screw
①. (Fig. 8 - 9)
5. Install the head holder. Unscrew the locking knob ③ and in-
sert the arm for the focus support from above ② into the hole
of the horizontal arm. (Fig. 10-11)
Page 26
F ig. 7 F ig. 7
F ig. 8 F ig. 8
①
F ig. 9 F ig. 9
②
③
F ig. 10 F ig. 10