Sz-Stl5 / Sz-Stl5Led - Optika Italy SZ Serie Manual De Instrucciones

8.9

SZ-STL5 / SZ-STL5LED

1. Adjust the height of the Desk Clamp ① to suit desktop
surface. (Fig. 32)
2. Attach the Desk Clamp ① on to the edge of the desk in the
desired position and with the clamp opening facing towards
the edge of desktop (Fig. 33). Tighten by hand the knob ②
to ensure that the Desk Clamp fully clamps to the desktop
surface and is secure. (Fig. 34)
3. To position the Collar at your desired height, you will need to
loosen the Collar as shown. Tighten by hand until the Collar
is firmly in place. (Fig. 35)
②
UP
DOWN
Page 33
①
F ig. 32 F ig. 32
F ig. 33 F ig. 33
F F ig. 34 ig. 34
F ig. 35 F ig. 35