Sz-Stlx - Optika Italy SZ Serie Manual De Instrucciones

Rotating the horizontal arm
1. Loosen the horizontal arm fixing knob ④ and rotate the arm,
then tighten again the knob. (Fig. 67)
• NOTE: 180° rotation of the microscope with respect to
the base could cause a rollover of the entire system.

9.13.3 SZ-STLX

Moving the horizontal arm
1. Unlock the knob on the right side of the horizontal arm ①.
(Fig. 68)
2. The arm can be extended or shortened according to specific
needs. (Fig. 69)
Page 44
④
①
F ig. 66 F ig. 66
F ig. 67 F ig. 67
F ig. 68 F ig. 68
F ig. 69 F ig. 69