Use Of Illumination (Sz-St2 / 3 / 7 / 8); Use Of Illumination (Sz-Obl); Use Of Eye Shields (Szo-B / T) - Optika Italy SZ Serie Manual De Instrucciones

9.10 Use of illumination (SZ-ST2 / 3 / 7 / 8)

1. Turn the transmitted light knob ② in order to turn ON/OFF or
to change the intensity of the transmitted light LED. (Fig. 53)
2. Turn the incident light knob ① in order to turn ON/OFF or to
change the intensity of the incident light LED.
• It is possible to use both illuminations at the same time.
Only for SZ-ST7 / SZ-ST8:
• Tilt and position the self-supporting arms of the base ③ to
optimally illuminate the sample. (Fig. 54)
• The arms can be placed individually in the desired position.

9.11 Use of illumination (SZ-OBL)

1. Turn the transmitted light knob ① in order to turn ON/OFF or
to change the intensity of the transmitted light LED. (Fig. 55)
2. Turn the mirror rotation knob ② to tilt the mirror until the de-
sired oblique illumination is obtained.
• The mirror has a smooth surface and a knurled surface. The
two surfaces make it possible to optimise observation by
providing adequate contrast depending on the sample to be
observed.

9.12 Use of eye shields (SZO-B / T)

• Use with eyeglasses
Fold rubber eyeshields with both hands. Folded eyeshields avoid
scratching the lenses of eyeglasses. (Fig. 55)
②
③
Page 40
①
F ig. 53 F ig. 53
③
F ig. 54 F ig. 54
①
②
F ig. 55 F ig. 55
F ig. 56 F ig. 56