Optika Italy SZ Serie Manual De Instrucciones página 45

Adjusting the horizontal lock
1. Unlock the fixing knob of the stopper ② and move it in a
position suitable to user's needs. (Fig. 70)
2. Lock the fixing knob to set the movement limit.
Tilting the head holder
1. Loosen the Allen screw ③ (Fig. 71) on the top of the head
holder.
2. The tilting black part can be moved. Once the desired angle
is achieved, tighten the wrench again.
Swivel the head
1. Unlock the fixing knob ④ and rotate the head to the desired
swivel angle (left or right), then tighten the knob again. (Fig.
72-73)
Page 45
②
④
F ig. 70 F ig. 70
③
F ig. 71 F ig. 71
F ig. 72 F ig. 72
F ig. 73 F ig. 73