Troubleshooting Tips - Haier QPCA08 Instrucciones De Instalación Y Manual Del Usuario

TROUBLESHOOTING TIPS

Problem Possible Causes
Unit does not st art or Power supply cord is not plugged into an
out let .
operate
Power supply cord has t ripped.
The Power but ton has not been pressed.
There is no power to t he elect rical out let .
A household fuse has blown or a circuit
breaker has t ripped.
The cont rol was programmed for a Time
Delay.
The bat teries in t he remote cont rol are dead. Replace t he bat teries.
The internal water t ank is full.
NOTE: The air condit ioner automat ically
t urns off, and t he Water Full indicator
illuminates to alert you of t his condit ion.
Remote cont rol is not Bat teries are dead.
working
Bat teries are inst alled incorrect ly.
The room temperat ure is hot .
Air condit ioner is
working but t he room
NOTE: On ext remely hot and humid days,t he
is not cooling.
air condit ioner will t ake longer to cool t he
room.
The cont rol is set incorrect ly to Fan or Dehum
mode.
Airflow is rest ricted.
Temperat ure set too high.
Air filters are dirt y or rest ricted.
Air condit ioner inst alled incorrect ly
Doors and windows are open.
49- 5000543 Rev. 2
Solut ion
Plug t he power cord into a grounded 3 prong out let .
Press and release t he RESET but ton on t he power
supply cord.
Press t he Power but ton on t he Cont rol Panel or
Remote Cont rol to t urn ON t he air condit ioner.
Plug a working lamp into t he out let to check for
power.
Replace t he fuse or reset t he circuit breaker.
Cancel t he Time Delay. See "Cont rol Panel."
Empt y t he water t ank. See "Air Condit ioner
Care."
Replace t he bat teries.
Make sure t he bat teries are inserted in t he correct
posit ion.
Allow t ime for t he room to cool when you first t urn
on t he unit .
Make sure t he air condit ioner has an adequate
BTU rat ing for t he size of t he room being cooled.
Set t he Mode to Cool and t he Fan Speed to High.
Remove any obst acles to t he airflow and redirect
airflow for uniform cooling.
Lower t he set temperat ure.
Clean t he air filter. See "Air Condit ioner Care."
Check t he exhaust hose and window panel for
proper inst allat ion.
Close t he doors and windows to t he room being
cooled to prevent cooled air from escaping.
15