Controls - Haier QPCA08 Instrucciones De Instalación Y Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROLS

Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Timer
Fan
Timer
5
4
NOTE: When t he machine is powered on for t he first t ime, t he
buzzer will play power- on music and t hen t he machine will go
into st andby st at us.
1. Power Button
Turns ON/ OFF power to t he air condit ioner.
NOTE: Turning off power by pressing t he Power but ton
does NOT disconnect t he appliance from
power supply.
Press t he Power but ton. The power indicator and
temperat ure display will illuminate, select desired set t ings.
After one minute, t he display light s will t urn off. Press
any but ton on t he unit or t he remote. The display will
illuminate. Then press corresponding but tons to change
unit funct ion.
Note: If changes funct ions from t he remote, it may
required mult iple but ton pushes to synchronize remote to
t he unit .
2. Mode Button
Press t he Mode but ton to toggle among t he operat ing
opt ions. The corresponding indicator will illuminate:
Cool – Cools t he room to t he set temperat ure
DRY – Reduces t he humidit y in t he room
Fan – Circulates t he air in t he room wit hout cooling
3. + and – Buttons
Set s t he Temperat ure when in Cooling Mode or set s t he
Time when Timer is selected.
To Set t he Temperature:
Press t he + or – but ton to select t he required temperat ure.
NOTE : The temperat ure cannot be set when t he air
condit ioner is in eit her Fan or DRY mode.
To Set t he Time:
Press t he + or – but ton to select t he required t ime.
49- 5000543 Rev. 2
High
Low
Sleep
Sleep
3
6
4. Fan Speed Button
The fan speed can be adjusted from Low to High speed when
t he air condit ioner is in operat ion.
NOTE : The fan speed cannot be adjusted when t he unit is in
DRY mode.
5. Timer Button
Program a t ime from (1 hour to 24 hours) for t he air
condit ioner to t urn Off or On.
6. Sleep Mode
Press t he Sleep but t on t o t urn on Sleep Mode.
NOTE: You cannot t urn on t he Sleep mode in t he Dry or Fan
Mode.
NOTE: When t he inner unit chassis is full of wat er, t he Wat er
Full light will t urn on. A buzzer will sound for several seconds
and t he compressor will st op.
Refer t o t he inst ruct ions on page 6 for draining t he wat er from
t he unit .
Cool
Water Full
Fan
Dry
Power
Mode
Power
2
1
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido