Hydraulic Connections - EdilKamin CALGARY Instalación Uso Y Mantenimiento

(Reserved for DEALER)
The boiler have a boiler with a capacity of 80 Lts. of water.
users.
This will provide for highly consistent combustion with excel-
lent yield .
.
.
IT CAN BE DAMAGED IF IT IS IGNITED WITH NO WA-
TER IN THE SYSTEM.
personnel who can issue a declaration of conformity according
to the Ministerial decree no. 37 ex L.46/90. Reference must ho-
wever be made to the laws in force in the individual countries.
Water treatment
Incorporated hydraulic kit.
A hydraulic kit is located on the boiler which consists of:
tank
The inclusion of the anti-condensation thermostatic valve pre-
vents corrosion that would otherwise compromise the life of
the boiler body.
.

HYDRAULIC CONNECTIONS

THE ELECTRONIC CIRCULATOR
lator with electronic motor.
Electronic control of operation:
a) Control mode p – c
pressure generated by the pump at a constant set value of H s.
-
Pressure differential
b) Control mode p – v
differential between the set value Hs and 1/2 H s. The pressure
-
Pressure differential
c) Venting procedure
This procedure allows the expulsion of air present in the
the pump will automatically alternate between maximum and
the circulator will go to the pre-set speed. You can then select
the desired mode of operation
- 32
-
-