EdilKamin CALGARY Instalación Uso Y Mantenimiento página 44

Ocultar thumbs Ver también para CALGARY:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68
FAQ
Smoke outlet that is at least 100 mm in diameter.
An air inlet in the room that is at least 80 cm².
(assess the division of primary and secondary circuits).
2) Can the boiler work without water?
NO. Practically all of the heat produced is transferred to the water.
It is advisable in any case to use a radiator in the same room.
4) Can I connect the inlet and outlet of the boiler directly to a radiator?
5) Do boiler also supply hot sanitary water?
It is possible to produce hot sanitary water evaluating the power of the boiler and the water plant.
6) Can I discharge the smoke from the boiler along the wall?
-
forms in the installation environment.
7) Do I need an air inlet in the room where it is installed?
The smoke extractor draws the air from the room into the combustion chamber.
The desired water temperature; the boiler will then adjust the power accordingly to obtain or maintain this.
(contact DEALER for initial start up)
9) Do I need to vacuum the pellet hopper?
10) Can I burn other fuel apart from pellets?
NO. The boiler has been designed to burn wood pellets that are 6 mm in diameter. Any other material can damage it.
- 44
-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Orlando

Tabla de contenido