EdilKamin CALGARY Instalación Uso Y Mantenimiento página 38

Mimic panel
to access the menu during programming
to increase the various settings
to decrease the various settings
(pellet loading/reserve button)
of the reserve.
(boiler setting button)
The right side of the display shows the temperature of any external storage tank/boiler (if the boiler sensor is con-
Left display
Filling the feed screw
steps:
It is quite normal for some pellet residue to remain inside the
due from accumulating.
Automatic ignition
the display and a countdown will commence in seconds (1020).
There is no preset time for the ignition process:
its duration will be automatically shortened if the control board
detects that certain tests have been carried out positively.
INSTRUCTIONS FOR USE
Pellet load/reserve
-
- 38
Boiler
Right display
Manual ignition (in case of start up failure)
stance to become red hot or if the resistance is temporarily not
the door and press 0/1 on the synoptic panel.
Operating modes
panel:
- press the + or – keys to increase or decrease the desired water
temperature.
- by pressing the key you can change the SET temperature of
keys.
It is possible to visualise (if the boiler probe is connected) the
while viewing the boiler value set that setting can be varied.
If the boiler probe is not connected dashes appear in place of
-
-