Error Codes; Technical Parameters - Baxtran BCD Serie Manual De Usuario

11. ERROR CODES

During the text initial of on o during the operation the balance can show a message of error. The meaning of these messages is described a then. If appears a
message of error, repeat the procedure what has caused the appearance of message such as back a light the balance calibration o any another function. If still go on
showing the message of error, then contact with your supplier for more information.
DESCRIPCION
CÓGIDO ERROR
Zero initial it greater what the value permissive (usually
Err 4
4% of the capacity maximum when is lights the balance o
when is press the button
Error of Keyboard
Err 5
The A/D account is not correct when turned on the balance.
Err 6
Error de calibración Error of calibration
FAI H or FAIL LL

12. TECHNICAL PARAMETERS

During the text initial of on o during the operation the balance can show a message of error. The meaning of these messages are described a then. if appears a
message of error, repeat the procedure what has caused the appearance of message such as back a light the balance calibration o any another function. If still go on
showing the message of error, then contact with your supplier for more information.
DISPLAY
WEIGHT UNIT WEIGHT
F1 off
WEIGHT UNIT WEIGHT
tech
WEIGHT UNIT WEIGHT
Pin
WEIGHT UNIT WEIGHT
Pin ----
WEIGHT UNIT WEIGHT
tEch LocAL
WEIGHT UNIT WEIGHT
tEch rEmotE
ACTION
COUNT
Enter to the Parameter section pressing the buttom
the balance. this allow to user establish the way in what he wants what the balance work choo-
sing values specific of several options.
COUNT
Press the buttom
COUNT
From the user parameter
Password.
The password by defect it 0000. between "0" four times. 9
COUNT
999 erase any password of user previous
Press
COUNT
""
Select the scale using the buttom
Press
COUNT
""
CAUSAS POSIBLES
Weight on the plate when the scale is turned on
weight excessive about the dish when the balance is places a
zero inadequate calibration of the balance.
damaged load cell. Damaged electronics.
Improper operation of the balance.
The platform is not installed. The load cell can be damaged.
Electronics may be damaged
Calibration Inadequate.
If the problem persists, contact your supplier or Giropès for
assistance.
until what the display shows
tech.
Press
for enter the section technical for this balance.
OPERATION MANUAL BCD
during the self-test when is turn
tech
the Balance the Ask What intro- Induce your
EN EN
35