Installation Precautions; Rear View; Side View - Pioneer KRP-500A Manual De Instrucciones

02 Safety precautions

Installation precautions

Observe the following precautions when installing with any items
such as the optional stand.
When using the optional stand, brackets, or equivalent
items
Ask your dealer to perform the installation.
Be sure to use the supplied bolts.
For details, see the instruction manual that comes with the
optional stand (or equivalent items).
When using other items
Consult your dealer.
The following six mounting holes can be used for the installation:

Rear view

Mounting
holes
10
En
All manuals and user guides at all-guides.com
• Use M8 screws, which go 12 mm to 18 mm in depth from the
• Be careful not to block the ventilation opening at the rear of the
• Be sure to install the display panel on a flat surface because it
Mounting
holes
• The screw holes other than the illustrations on the left are to be
• Do not mount or remove the display panel to or from the stand,
• It is strongly recommended to use the optional Pioneer
• Pioneer shall not be liable for any personal injury or product

Side view

Display panel
Caution
mounting surface of the display panel. See the side view above.
display panel.
contains glass.
used only for the specified products. Never use them for
mounting non-specified products.
with speakers attached.
Note
mounting products.
damage that results from the use of mounting items other than
the optional Pioneer products.
Mounting surface
Mounting bracket
(or equivalent item)
M8 screw
12 mm to 18 mm