Av Selection; Basic Picture Adjustments; For Av Source; Picture - Pioneer KRP-500A Manual De Instrucciones

Setting up

AV Selection

Select from the seven viewing options, depending on the current
environment (e.g., room brightness), the type of the current TV
program, or the type of images input from external equipment.
Your flat screen TV has been adjusted to provide optimum sound
quality for each AV Selection option. However, you can adjust it to
your preference.
1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "AV Selection" (/ then ENTER).
4 Select the desired option (/ then ENTER).

AV Selection

OPTIMUM
STANDARD
DYNAMIC
MOVIE
SPORT
GAME
USER

For AV source

Item

Description
OPTIMUM Automatically adjusts the brightness of the image to
the optimum level in accordance with the brightness
level of the viewing area.
This setting is shared by both the external inputs and TV
input sources.
STANDARD For a highly defined image in a normally bright room.
This setting is shared by both the external inputs and TV
input sources.
DYNAMIC Sharp imaging with the maximum contrast.
Note that this mode does not allow manual image
quality adjustment.
This setting is shared by both the external inputs and TV
input sources.
MOVIE
Optimized for movies.
This setting is shared by both the external inputs and TV
input sources.
SPORT Optimized for sports programs.
This setting is shared by both the external inputs and TV
input sources.
GAME Lowers image brightness for easier viewing.
This setting is shared by both the external inputs and TV
input sources.
USER Allows the user to customize settings as desired. You
can set the mode for each input source.
For PC source
Item Description
STANDARD For a highly defined image in a normally bright room
USER Allows the user to customize settings as desired. You
can set the mode for each input source.
5 Press HOME MENU to exit the menu.
All manuals and user guides at all-guides.com

Basic picture adjustments

Adjust the picture to your preference for the chosen AV Selection
option (except DYNAMIC).
1
2
3
If you select "OPTIMUM" for "AV Selection", the following submenu
appears on screen.
Note
• You can also press AV SELECTION on the remote control to
change the viewing option.
• If you have selected "DYNAMIC", you cannot select "Contrast",
"Brightness", "Color", "Tint", "Sharpness", "Pro Adjust", and
"Reset"; these menu items are dimmed.
• If you have selected "OPTIMUM", you cannot select "Contrast",
"Brightness", "Color", "Tint", "Sharpness" and "Pro Adjust".
• As "OPTIMUM" automatically optimizes image quality, the
process in which image settings such as brightness and tint
gradually change may be seen on the screen. This is not a
malfunction.
• When "OPTIMUM" is selected, images are reproduced based
on the information collected at the Room Light Sensor, as well
as the optional color sensor (when in use) regardless of its
setting ("Mode 1" or "Mode 2") for the "Room Light Sensor"
menu.
Press HOME MENU.
Select "Picture" (/ then ENTER).
Select an item to be adjusted (/ then ENTER).

Picture

AV Selection

Contrast

Brightness

Color

Tint

Sharpness

Pro Adjust

Reset

Picture
AV Selection

PureCinema

Sound Control

OPTIMUM Performance

Reset
08
STANDARD
40
0
0
0
0
OPTIMUM
Off
31
En