Freezing Images - Pioneer KRP-500A Manual De Instrucciones

Watching TV
2 To select the desired input source, press the appropriate
input source button.
• If watching TV programs, press P+/P– to change the channel.
Note
• The multiscreen function cannot display images from the same
input source at the same time. If you make such an attempt, a
warning message appears.
• The multiscreen function cannot display images from
combinations of two external input sources ("INPUT 1" to
"INPUT 6", "PC"). It can display images from the following
combinations of input sources: built-in TV tuner and one
external source ("INPUT 1" to "INPUT 6", "PC").
• When you press HOME MENU, the single-screen mode is
restored and the corresponding menu is displayed.
• When in the 2-screen mode, images displayed on the right
screen may look less fine, depending on images.

Freezing images

Use the following procedure to capture and freeze one frame from
a moving image that you are watching.
• Before operating with the remote control unit, make sure to
select the TV mode using its SELECT button. See Controlling
other equipment using the supplied remote control unit on
page 53.
Important
• Displaying a static image for a long period of time, or for
shorter periods of time everyday, may result in image retention.
AV
SELECTION
TOOLS
Press d.
•
A still image appears on the right screen while a moving image is
shown on the left screen.
Normal image
Press d again to cancel the function.
•
All manuals and user guides at all-guides.com
DVD HDD
Still image
Note
• You cannot freeze the picture when using the 2-screen or
picture-in-picture mode.
• When this function is not available, a warning message
appears.
06
25
En