Blue Led Dimmer; Orbiter; Video Pattern; Screen Protection - Pioneer KRP-500A Manual De Instrucciones

Useful adjustment settings

Blue LED Dimmer

You can adjust the brightness of the Power ON indicator depending
on the brightness level of the viewing area. When "Auto" is
selected, the brightness of the indicator changes to "High", "Mid" or
"Low" to match the brightness level of the viewing area.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Blue LED Dimmer" (/ then ENTER).
4 Select "Auto", "High", "Mid" or "Low" (/ then ENTER).
5 Press HOME MENU to exit the menu.

Orbiter

This function automatically shifts the image little by little to reduce
the occurrence of the burning.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Orbiter" (/ then ENTER).
4 Select "Mode 1" or "Mode 2" (/ then ENTER).
(AV source)

Item

Description
Off Disables the Orbiter
Mode 1 Enables the display protection function for any screen mode
(default) other than "Dot by Dot"
Mode 2 Enables the display protection function for all available
screen modes
(PC source)
Item Description
Off Disables the Orbiter
(default)
Mode 1 Enables the Orbiter
Mode 2 Smoothes text/characters display
5 Press HOME MENU to exit the menu.
To cancel this function, select "Off" in step 4.
Note
• For the Dot by Dot mode, see Selecting a screen size manually
on page 40.
All manuals and user guides at all-guides.com

Video Pattern

You can display the Video Pattern screen that also helps eliminate
after-image when it occurs.
1
2
3
A confirmation screen appears.
4
The Video Pattern screen displays.

Screen Protection

This function establishes multiple settings for a longer display life.
To select this option, follow the procedure below.
1
2
3
The following settings are automatically entered:
4
5

Sleep Timer

When the selected time elapses, the Sleep Timer automatically
places the system into the standby mode.
1
2
3
Select "Off" (cancel), "30 min", "60 min", "90 min" or "120 min".
4
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Video Pattern" (/ then ENTER).
Select "Start" (ENTER).
Note
• The system is automatically placed into standby one hour after
the Video Pattern screen has started.
• While the Video Pattern screen is on, no buttons operate
except a on the remote control unit and STANDBY/ON on the
Media Receiver. If any of the above buttons is pressed, a
message appears on screen (the Video Pattern function is on).
• To cancel the Video Pattern screen, press a on the remote
control unit, STANDBY/ON on the Media Receiver or Power On
(a) on the display.
• The Video Pattern timer has priority over the sleep timer. When
the Video Pattern timer is on, the sleep timer becomes
ineffective.
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Screen Protection" (/ then ENTER).
• Auto Size: Wide-Zoom
• Side Mask - Detection: Mode 1
• Orbiter: Mode 1
• Energy Save: Mode 1
• AV Selection: OPTIMUM (when "DYNAMIC" is selected for "AV
Selection")
Select "Yes" or "No" (/ then ENTER).
Press HOME MENU to exit the menu.
Press HOME MENU.
Select "Sleep Timer" (/ then ENTER).
Select the desired time (/ then ENTER).
Press HOME MENU to exit the menu.
09
43
En