Useful Adjustment Settings; Switching The Vertical Drive Mode (Av Source Only); Adjusting Image Positions (Av Source Only); Adjusting Image Positions And Clock Automatically (Pc Source Only) - Pioneer KRP-500A Manual De Instrucciones

Useful adjustment settings

Chapter 9
Useful adjustment settings
About "Option" menus
The "Option" menu consists of two screens. To select the desired
menu, press repeatedly / to switch between Screen 1 and
Screen 2. The current screen number appears at the top right
corner on the screen.
Option
Position

Auto Size

Side Mask

HDMI Input

HDMI Control Setting

Blue LED Dimmer

Orbiter

Video Pattern

Option

Drive Mode

Color System

Monitor Out

Game Control Pref

Room Light Sensor
Screen Protection
Switching the vertical drive mode
(AV source only)
You can select the desired drive mode according to the program
you watch.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Drive Mode" (/ then ENTER).
4 Select the desired parameter (/ then ENTER).
Drive Mode
Controls the driving frequency for output signals
Selections 1 Standard mode as well balanced setting for
general sources
2 Suitable setting for pictures with scrolling text
3 Setting for smoother reproduction of movies, etc.
5 Press HOME MENU to exit the menu.
All manuals and user guides at all-guides.com
1/2
Off

Adjusting image positions (AV source only)

Adjust the horizontal and vertical positions of images on the
Auto
display.
Mode 1
1
2
3
2/2
1
4
Auto
5
Always Output
position (/).
Off
6
Mode 1
(For AV source)
Adjusting image positions and clock
automatically (PC source only)
Use Auto Setup to automatically adjust the positions and clock of
images coming from a personal computer.
1
2
3
4
Note
• This setting can be made for each input source separately.
• Selections are effective only for the following input signals:
PAL/SECAM, 576i, 576p, 1080i@50 Hz, 720p@50 Hz.
• This setting cannot be made when 480i, 480p, 1080i@60 Hz,
720p@60 Hz, 1080p@24 Hz or 1080p@60 Hz signals are input.
• The Drive Mode does not operate when "On" is selected in
"Game Control Pref".
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Position" (/ then ENTER).
Select "H/V Position Adjust" (/ then ENTER).
Adjust the vertical position (/) or the horizontal
Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all items, press / to select
"Reset" in step 4, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
• Adjustments are stored separately according to input source.
• Depending on the displayed video, the image position may not
change even after adjustment.
• When "Dot by Dot" is selected for the screen mode, the
"Position" menu is dimmed.
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Auto Setup" (/ then ENTER).
• A message screen appears and Auto Setup starts.
Press HOME MENU to exit the menu.
Note
• When Auto Setup is finished, "Auto Setup Completed."
appears.
• Even when "Auto Setup Completed." appears, Auto Setup may
have failed, depending on conditions.
09
39
En