Using Control Cords; Enjoying Through Usb Interface (Home Gallery Function); Auto Installation - Pioneer KRP-500A Manual De Instrucciones

10 Using with other equipment
Specifying the type of digital video signals
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "HDMI Input" (/ then ENTER).
4 Select "Video" (/ then ENTER).
5 Select the type of digital video signals (/ then ENTER).
• If you select "Auto", an attempt will be made to identify the type
of digital video signals when digital video signals are received.
Item Description
Auto (default) Automatically identifies input digital video signals
Color-1
Digital Component Video signals (4:2:2) locked
Color-2 Digital Component Video signals (4:4:4) locked
Color-3 Digital RGB signals (16 to 235) locked
Color-4 Digital RGB signals (0 to 255) locked
6 Press HOME MENU to exit the menu.
Note
• If you select a parameter other than "Auto", make such a
setting that results in natural color.
• If no image appears, or images appear in inappropriate colors,
specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
Specifying the type of audio signals
When using the INPUT 3 HDMI terminal, you need to specify the
type of audio signals.
1 Repeat steps 1 to 3 provided for Specifying the type of
digital video signals.
2 Select "Audio" (/ then ENTER).
3 Select the type of audio signals (/ then ENTER).
• If you select "Auto", an attempt will be made to identify the type
of audio signals when audio signals are received.
Item Description
Auto (default) Automatically identifies the input signals
Digital Accepts digital audio signals
Analog Accepts analog audio signals
4 Press HOME MENU to exit the menu.
Note
• The INPUT 4 and INPUT 5 HDMI terminals accept only digital
audio signals.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the operation
manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analog audio cables.
50
En
All manuals and user guides at all-guides.com

Using control cords

Connect control cords between the Media Receiver's CONTROL
(OUT) terminal and other Pioneer equipment having the t logo.
Use a mono sound cable with a mini plug (not provided).
Enjoying through USB interface (Home
Gallery function)
On this system, you can watch JPEG images that have been
captured and stored in memory cards using a digital still camera.
You can also connect your digital camera directly to the Media
Receiver using a USB connector cable.
• A single USB device can only be connected at a time. No USB
• Such devices as a printer or keyboard cannot be connected
Readable memory cards
This system can read memory cards whose formats are FAT16,
FAT32, or VFAT.
Media Receiver (rear)
Digital still
USB connector cable
camera
USB flash drive
Multi-card reader
Note
hub can be connected.
and used.
CONTROL
IN
OUT
Image data display
ON STANDBY SLEEP
KRP-M01
STANDBY/ON
INPUT 6
INPUT VOLUME CHANNEL USB
PHONES VIDEO L AUDIO R ANALOG RGB
PC
Media Receiver