Adjusting Image Positions And Clock Manually (Pc Source Only); Color System Setting; Selecting A Game Mode; Selecting A Screen Size Manually - Pioneer KRP-500A Manual De Instrucciones

09 Useful adjustment settings
• Auto Setup may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the PC
image and try again.
• Be sure to connect the computer to the Media Receiver and
switch it on before starting Auto Setup.
• This function is not selectable when the PC is connected to the
HDMI terminal.
• Depending on the displayed video, the image position may not
change even after adjustment.
Adjusting image positions and clock
manually (PC source only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions and
clock of images when necessary.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Manual Setup" (/ then ENTER).
4 Select the item to be adjusted (/ then ENTER).
Perform adjustment (/ and /).
5
• With "Clock" or "Phase" selected, you can change the
parameter using /.
6 Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all items, press / to select
"Reset" in step 4, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
• This function is not selectable when the PC is connected to the
HDMI terminal.
• Depending on the displayed video, the image position may not
change even after adjustment.

Color system setting

If an image does not appear clearly, select another color system
(e.g., PAL, NTSC).
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Color System" (/ then ENTER).
4 Select a video signal system (/ then ENTER).
• You can select "Auto", "PAL", "SECAM", "NTSC", "4.43NTSC",
"PAL-M" or "PAL-N".
• With "Auto" selected, input signals are automatically
identified.
5 Press HOME MENU to exit the menu.
Note
• The factory default is "Auto".
• You do not need to enter any setting if "HDMI Input" has been
selected.
40
En
All manuals and user guides at all-guides.com
• You need to perform color system setting for each of "INPUT 1",
• For the color system setting, see steps 11 and 12 under Setting

Selecting a game mode

When playing a game, you can use this function to establish a
preference for image quality or operability.
1
2
3
4
Item
On
Off
5
• The "Game Control Pref" is only available when using an
• The "Game Control Pref" options are not effective when PC
• The "On" setting is not effective when freezing images or in the

Selecting a screen size manually

Press f to switch among the screen size options selectable for
the type of video signals currently received.
Each time you press f, the selection is switched.
The selectable screen sizes differ depending on the types of input
signals.
• If images with black bands on both sides or top and bottom of
"INPUT 2", "INPUT 3" and "INPUT 6".
up TV channels manually on page 28.
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Game Control Pref" (/ then ENTER).
Select "On" or "Off" (/then ENTER).
Description
Establishes a preference for operability
Establishes a preference for image quality
Press HOME MENU to exit the menu.
Note
external input (except a PC source) and "GAME" is selected in
"AV Selection".
signals are received (when a PC source menu is displayed on
the screen).
multiscreen mode.
Important
the screen – when using the "4:3", "FULL 14:9" or "CINEMA
14:9" modes, for example – are displayed continuously for long
periods or for shorter periods of time over several days, image
retention may result. It is recommended that you enjoy
watching images displayed in full screen, except when doing
so may result in copyright infringement.