Using The Multiscreen Functions; Splitting The Screen - Pioneer KRP-500A Manual De Instrucciones

06 Watching TV
Note
• In each of the sound multiplex mode selected using the -
button, the display changes depending on broadcasting
signals being received.
• Once the MONO mode is selected, the sound remains mono
even if the system receives a stereo broadcast. You must switch
the mode back to  or  mode if you want to hear stereo sound
again.
• Selecting a sound multiplex mode while the input source is
"INPUT 1" to "INPUT 6" or "PC" does not change the type of
sound. In this case, sound is determined by the video source.
• While watching a TV channel with any High Deviation setting
(page 29), you cannot change the sound multiplex mode.

Using the multiscreen functions

• Before operating with the remote control unit, make sure to
select the TV mode using its SELECT button. See Controlling
other equipment using the supplied remote control unit on
page 53.

Splitting the screen

Use the following procedure to select the 2-screen or picture-in-
picture mode.
Note
• Displaying a split screen for a long period of time, or for shorter
periods of time everyday, may result in image retention.
2-screen
Main screen
Picture-in-picture
Main screen
24
En
All manuals and user guides at all-guides.com
Sub screen
Sub screen
P
HDMI
CONTROL
DVD
TOP MENU
/GUIDE
HOME
MENU
MENU
AV
SELECTION
TOOLS
Press c to select the display mode.
1
Each time you press c, the display mode is switched between
2-screen, picture-in-picture, and single-screen modes.
• In 2-screen or picture-in-picture mode, press
position of the two screens shown.
• The left screen (in the 2-screen mode) or the larger screen (in
the picture-in-picture mode) is the active screen, indicated by a
"z" icon. You can use any of the normal functions to change
the picture and sound.
• In picture-in-picture mode, press
the small screen anti-clockwise.
INFO
ENTER
RETURN
DVD HDD
to switch the
to move the position of