Ingeteam NEO Manual De Usuario página 14

Ingeteam
User access Choose which other users can associate the charger with their account, and the control you
want to have in that process. Consult
Only for
for more information about the types of profiles there are, and what each one can do.
ADMINISTRATOR
users
There are three different modes you can choose from:
Changes to this setting will have no effect on users who already have the charger associated
with their account at the time.
Access control Select how the charger lock works and prevent anyone other than you from using your unit
without permission. There are three Access Control modes:
In PROXIMITY mode, the charger is unlocked when the INGETEAM NEO App and the charger
establish communication via Bluetooth when you approach the charger. Review section
Communications with the charger"
Installation Data In order to prevent the operation of the charger from posing a risk to the electrical
installation, it is VERY IMPORTANT to correctly define the maximum current allowed by the
electrical installation of the charger. Therefore, you must check the electrical panel that
powers the unit and configure the Intensity of the general protection of the installation.
In case of doubt, please consult the electrical installer who carried out the electrical installation and
assembly of your charger.
Dynamic Power The Dynamic Power Control balances the load of your electric vehicle based on your home's
Control consumption at all times, ensuring that the total load (home and vehicle) never exceeds the
contracted/available power.
In order to activate this function you will need to configure the following:
1
CURVE
CURVEx3
14
NOBODY: No users will be able to associate the charger to their account.
EVERYBODY: Any user will be able to associate the charger to their account.
AUTHORIZE: When a user tries to pair the charger to their account, you will receive a
notification to authorize it.
FREE: The charger will always be unlocked (and can be used by anyone).
PROXIMITY: The charger will be locked until you get near it. In order for the charger to
unlock, you must have your mobile phone with you and the INGETEAM NEO App must
be running at least in the background.
CAUTION
MANUAL: The charger will be locked until you press the Unlock button on the
Charging screen.
CAUTION
Measuring device
Select No if you do not have any measuring device installed for the Dynamic
No
Power Control, or if you do not want the charger to perform load balancing.
Select CURVE if you have this device installed and connected to the charger
for single-phase installations.
Select CURVEx3 if you have this device installed and connected to the charger
for three-phase installations, and follow the on-screen instructions to ensure
correct communication between both elements.
Only in NEO Pro chargers.
Charger management from the INGETEAM NEO App
the"5. Users and profiles"
of this user guide for more information.
section of this user guide
"4.
ABV2014IQM01_ - User Manual