Removing And Installing Seat Cover; Removing The Cover - Britax ONE4LIFE CLICKTIGHT Guia Del Usuario

Removing and Installing Seat Cover

NOTE: If removing cover to wash, see Cleaning
section on page 49.

Removing the Cover

Removing the Headrest Cover
1� Loosen the harness. Press
the harness release button
(A) and pull both harness
straps forward (B).
2� Release the buckle.
3. If applicable, remove infant
insert pillow from child
restraint.
4� Lift the elastic strap up
and away from the rear of
headrest adjuster.
5� For select covers only:
Undo the two elastic
straps from the back of the
headrest.
6� Open hook and loop
fasteners in headrest cover
and pull cover away from the
child restraint.
42
Table of Contents
Removing the CLICKTIGHT Cover
1� Open the CLICKTIGHT.
2� Pull the cover up from
B
A
3. If applicable, remove infant
4. Undo the hook and loop
5� Pull the cover away from
Removing the Side Protection Top Cover
1� Lower the headrest.
2� Unhook elastic from around
Unhook the elastic bands
connecting the cover to
the CLICKTIGHT.
around the front of the
CLICKTIGHT and close the
CLICKTIGHT.
insert pillow from child restraint.
fasteners near the bottom of
the harness straps.
the harness and child
restraint. Separate the belly
pad from the rest of the
cover (if needed).
the carry handle.
Table of Contents
43