universalblue ube2407-21 Manual De Instrucciones página 44

BURNER NOZZLE REPLACEMENT
Loosen the nozzle with a wrench (7).
Insert the new nozzle, making sure it
is suitable for the type of gas
required (see
reference).
After you have converted the unit to
a different gas type, be sure to attach
a label with the new information.
CONVERT THE GAS SOURCE
Burners Flame
Full
flame
Regular
burners
Saving
flame
Valve adjustment
The valve adjusts the control knob. The knob must be set to the flame
saving position ON. Remove the knob and adjust the flame with the
help of a small screwdriver.
table above
Converting the hob from
LPG to natural gas
Replace the burnerNozzle
according to the guidelines
intable 1
Loosen the shaft
adjustment (see fig.7 below)
and adjust the flame
for
Converting the hob from natural
Replace the burner Nozzle
accordingto the guidelines in
Loosen the shaft adjustment (see
fig.7 below ) and adjust the flame
gas to LPG
table 1
44