Chauvin Arnoux CA 6161 Guia De Inicio Rapido página 12

KEYS
To print a label on the current measurement or Auto-Script.
To display help corresponding to the current function.
To calibrate the touch screen (long press).
To return to home.
To go up one level.
CONNECTORS
30 V
MAX
30 V
MAX
30 V
MAX
START
STOP
TERMINALS
HV DIELECTRIC
5 kV
600 V
CAT III
INSULATION
1 kV
600 V CAT III
CONTINUITY
25 A
12 V
C1 P1 P2 C2
300 V CAT III
RCD, DISCH, PHSEQ, Z , Z
s i
440 V
Max
L PE
L1 L3
N
600 V CAT III
L2
300 V CAT III
230 V 16 A
CONTINUITY
TOUCH CURRENT
TEST SOCKET
Specific green 4-point socket for connecting the dielectric pistol control or the foot control
pedal (optional).
Specific yellow 5-point socket to connect the signal lamp tower (optional).
Specific blue 6-point socket for connecting the door closure checker.
USB type B socket to connect to a PC in order to be able to transfer recorded data
or update firmware.
2 USB type A sockets to connect printer, barcode reader or RFID receiver.
2 safety terminals to connect high voltage pistols for dielectric tests.
2 safety terminals for connecting safety leads for insulation measurements.
4 safety terminals for connecting Kelvin pistols and/or Kelvin crocodile clips for continuity
measurements.
3 safety terminals to connect the tripod cord for mains measurements.
1 safety terminal to connect a safety lead for continuity measurements on sockets
and contact current measurements (CA 6163).
1 Schuko socket to connect the power cord of the device under test for continuity, insulation
®
or power measurements. This plug can be replaced by a plug suitable for your country.
1 specific 4-point connector for connecting the ammeter clamp (optional) for current
measurements.
12