Line Cut-Off Blade; Operation Tips; Cutting Tips; Maintenance - GreenWorks STB80L01 Manual Del Operador

EN
9.5

LINE CUT-OFF BLADE

This trimmer is equipped with a line cut-off blade
(17) on the guard. The line cut off blade continuously
trims the line to ensure a consistent and efficient cut
diameter. Advance line whenever you hear the motor
running faster than normal, or when trimming efficiency
diminishes. This will maintain best performance and
keep line long enough to advance properly.
9.6

OPERATION TIPS

Keep clearance between the body and the machine.
Do not operate the machine without guard in place.
Follow these tips when operating the machine:
• Keep the machine connected to the correctly worn
harness.
• Keep a firm hold with both hands on the machine
while you operate the machine.
• Cut tall grass from the top down.
If grass winds around the trimmer head:
• Remove the battery pack.
• Remove the grass.
WARNING
WARNING
English
9.7

CUTTING TIPS

• Tilt the machine toward the area to be cut. Use the
tip of the cutting line to cut grass.
• Move the machine from right to left to prevent
thrown debris from hitting the operator.
• Do not cut in the danger area.
• Do not force the trimmer head into uncut grass.
• Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood
can wear the cutting line quickly.
Direction of rotation
Best cutting area
10

MAINTENANCE

Read and understand the safety regulations and the
maintenance instructions before you clean, repair or
do the maintenance work on the machine.
Make sure that all nuts, bolts and screws are tight.
Check regularly that the handles are firmly mounted.
10
Dangerous cutting area
IMPORTANT
IMPORTANT