Sauder 423531 Instrucciones De Montaje página 45

Step 10
Use the FURNITURE TIPPING RESTRAINT KIT (98) for added stability. Fasten the strap to the top
å
surface of the TOP (A) using the short screw as shown.
Place your unit in its fi nal location against a wall. Locate the center of a stud in your wall near your unit
å
and mark it with a pencil. Next, drill a 1/8" hole on the mark and into the stud in your wall.
Fasten the unit to the wall. Use the long screw through the other end of the strap and into the 1/8" hole.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
Drill this hole into
a stud in your wall.
423532
Use the short screw through
the hole in the strap and into
the top surface of the TOP (A).
98
www.sauder.com
A
No load
25 lbs.
25 lbs.
Page 13