Sportstech Live App; Maintenance, Cleaning, Storage; Troubleshooting - SPORTSTECH VP250 Manual De Instrucciones

6. SPORTSTECH
The SPORTSTECH LIVE app has been developed primarily for our sLine devices. But even if you don't
have such a training device yet, the app has some functions for you, with which you can make your
everyday sporting life more varied and interesting. Simply find out more online and download the app.
The Sportstech LIVE App offers you,
among other things:
• Individual workouts with professional trainers
• Landscape and outdoor videos
• Determining training priorities
• Training data in real time
• Training history and metrics
Information here: https://contact.innovamaxx.de/sportstech/support

7. Maintenance, Cleaning, Storage

• Immediately after training, switch the device off, and unplug it.
• After training, remove sweat from the device and its remote control with a dry or slightly wetted cloth.
Never use agressive cleansers.
• The storage site of the device must fulfill these requirements:
- Dry and clean indoor area, free from explosive or flammable substances and dust
- Temperature within permitted range for operation (see technical data)
- No direct sunlight
• For longer storage, protect the device against dust.

8. Troubleshooting

Error
Device does not start
Louder operating noise
The remote control
does not work.
Device stops during
use.
Normal function not
possible.
Contact customer service if any problems or doubts persist.
26
LIVE
• Compete with others
in competition mode -
collect trophies in ranking
• Equipment-independent workouts e.g. for yoga
• Delicious and varied cooking recipes
• ...and much more!
Possible reason
Cables not connected correctly
Fuse has tripped.
Device is standing on hard ground.
Device is not horizontal.
Batteries are empty.
Distance or angle too large or sensor
covered
Functional duration of 10 minutes
achieved.
Control overloaded
APP
Possible solution
Connect both cables correctly
Switch the fuse on again or have it replaced
Place the device on a surface.
Align the device horizontally.
Replace the batteries.
Hold the remote control with "visual contact"
less than 2 m in front of the device.
Take a break.
Disconnect the power supply and restart
the device.