Technical Data; Inserting/Replacing The Battery - Flex IW 1/2 750 18.0-EC Instrucciones De Funcionamiento Originales

IW 1/2" 750 18.0-EC
However, if the tool is used for different
applications, with different cutting accessories
or poorly maintained, the vibration emission
level may differ.
This may significantly increase the exposure
level over the total working period.
To make an accurate estimation of the
vibration exposure level, it is also necessary
to take into account the times when the tool
is switched off or running but not actually in
use.
This may significantly decrease the exposure
level over the total working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and the
cutting accessories, keep the hands warm,
organization of work patterns.
CAUTION!
Wear ear defenders at a sound pressure
above 85 dB(A).

Technical data

Tool
Type
Rated voltage Vdc
No-load
r.p.m
speed
Max. impact
bpm
rate
Max torque N
Weight
according
to"EPTA
Procedure
kg
01/2003"
(without
battery)
18V
Battery
Weight of
kg
battery
Working
-10~40℃
temperature
Storage
< 50℃
temperature
IW 1/2" 750 18.0-EC
Impact Wrench
18
0-500/0-1300/
0-2300
2800
750
1.9
AP 18.0/2.5
AP 18.0/5.0
AP 18.0/8.0
AP 18.0/2.5 0.4
AP 18.0/5.0 0.7
AP 18.0/8.0 1.1
Charging
4~40℃
temperature
Charger CA 10.8/18.0, CA 18.0-LD
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1 1/2" Square drive
2 Variable-speed trigger switch
3 Speed control panel
4 LED light
5 Direction preselector switch (forward /
center-lock /reverse)
6 Strap fixing
For attaching a wrist strap (not included)
in order to reduce the chances of
dropping your tool.
7 Belt clip
8 Opening
9 Fastening screw
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power
tool
Unpack the cordless impact wrench and
check that here are no missing or damaged
parts.
NOTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge the
batteries fully. Refer to the charger operating
manual.

Inserting/replacing the battery

■ Press the charged battery into the power
tool until it clicks into place (see figure B).
■ To remove, press the release button and
pull out the battery (see figure C).
15