Flex IW 1/2 750 18.0-EC Instrucciones De Funcionamiento Originales página 17

IW 1/2" 750 18.0-EC
■ Reverse: bolt removal mode; the tool stops
automatically as soon as it has loosened the
bolt/nut.
To select the "A" mode:
■ check the active mode:
Either depress and release the trigger switch
Forward Rotation
LED indicator displayed
on panel
Reverse Rotation
LED indicator displayed
on panel
ON OFF
Working
Application
Mode
1 Fine-tuned tightening of small bolts and nuts.
2 When tightening, the torque is moderate.
3 When tightening, the torque is maximum.
A Tightening with automatic stop.
Working
Application
Mode
1 Fine-tuned loosening of small bolts and nuts.
2 When loosening, the torque is moderate.
3 When loosening, the torque is maximum.
A Loosening with automatic stop.
or press the drive-control button or the "A"
button directly without touching the trigger
switch.
The LED indicator beside the "A" button will
illuminate to indicate the current mode setting.
See more details in chart below:
17