Safety; Safety Notices; Safe Working - LIVARNO LUX 285632 Instrucciones De Utilización Y De Seguridad

Lamp socket: E14
Protection class: II /
Bulb: E14, max. 5 W, 3-level
dimmable

Safety

Safety notices

Damage due to failure to comply with these operat-
ing instructions will invalidate the warranty! We
assume no liability for consequential damage! We
assume no liability for material damage or personal
injury due to improper handling or failure to comply
with the safety instructions!
INJURY AND ACCIDENT HAZ-
ARD FOR TODDLERS AND SMALL
CHILDREN! Never leave children unattended
with the packaging material. The packaging
material represents a danger of suffocation.
Children frequently underestimate the dangers.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, when
supervised or instructed in the safe use of the
device and they understand the associated risks.
Do not allow children to play with the device.
Cleaning and user maintenance must not be
performed by children without supervision.
RISK OF INJURY! Do not leave the lamp or
packaging material lying unattended. Plastic
film or bags, Styrofoam etc. can become
dangerous toys for children.
Avoid the risk of fatal injury
from electric shock
Always check the mains plug for damage
before connecting the light to the mains. Never
use the light if it shows any signs of damage.
RISK OF FATAL
Introduction / Safety
In the event of damage, repairs or other prob-
lems with the light, please contact the service
centre or an electrician.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Never open or insert anything into electrical
fittings or equipment (e.g. switches, fitting socket).
This will pose a risk of fatal injury from electric
shock.
Only touch the insulated area of the mains
plug when connecting to or disconnecting from
the mains!
To prevent hazards, a damaged flexible outer
lead of this light may only be exchanged by
the manufacturer, his service representative or
by an equally qualified specialist.
Before every use, verify the available mains
voltage matches the required operating voltage
of the light (see „Technical Data").
Always unplug the mains plug, respectively,
from the mains prior to assembly, disassembly,
cleaning, or when the light will not be used for
extended periods.

Safe working

Position the lamp so it is protected from moisture
and dirt.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Do not cover the lamp with objects. Excessive
heat can result in fire.
Do not look into the illuminant from a close dis-
tance during operation.
Do not use optical instruments to look at the il-
luminant.
In order to disconnect the light completely from
the power supply, the mains plug must be re-
moved from the socket.
GB/IE 13