Charging The Battery - Dogtra Europe YS600 Manual De Instrucciones

CHARGING THE BATTERY

1. Open the rubber plug on the YS600 and connect the
charger to the battery charging receptacle as shown in
the picture.
2. Plug the charger into an electrical power outlet (220V).
3. While the battery is recharging, the LED will stay on
red. The LED light will become green when the battery
is completely recharged (the battery is fully charged
after 2 hours).
Note : Only use Dogtra approved Lithium Polymer
Battery chargers designed for the YS600. Non-Dogtra
chargers could potentially damage the unit.
28
Charger Info
Manufacturer : HON-KWANG
Manufacturing country : CHINA
Model name : HK-AP-050A100-EU
INPUT : 100~240V~50/60Hz 0.2A / OUTPUT : 5V 1.0A
WARNING
During battery charging, the unit must be close to
the wall outlet and the wall outlet must be easily
accessible for security reasons.
29