SPORTSTECH sBike Lite Manual De Instrucciones página 30

2.5 SADDLE AND BAR; DUMBBELL HOLDER
2.5.1 Saddle Bar
• First person: Pull the knob ('Kn2') outwards against the spring force. If necessary, loosen it beforehand
by turning it a little to the left.
• Second person: Carefully lower the seat tube ('34') into the main housing ('43'). Observe the required
minimum depth.
• Let go of the knob. Make sure that the locking pin on the knob snaps into one of the holes of the front
bar inside the main housing.
• Tighten the knob with your hand.
2.5.2 Saddle
• If necessary, loosen the clamp of the saddle ('16').
• Place the saddle on the vertical tube of the saddle holder ('18').
• Tighten the clamping of the saddle with an open-end wrench. Adjust the saddle approximately horizontally.
• If necessary, correct the tilt of the saddle
30
16
34
43
Kn 2
33
18
35
#33 2X
#116 1X
#115 1X
13 15