2.4 MOUNTING THE PEDALS
63L
•
Identify the left pedal. It is marked with an 'L'.
•
Put it on the left pedal crank ('Cr').
•
Use your fingers to turn the thread of the left pedal into the threaded hole of the pedal crank. Note that
the left pedal has a left thread: when viewed from the side, turn it in to the left.
•
Tighten the pedal to the left using the open-end wrench.
•
Repeat the steps for the right pedal. It is marked with an 'R'.
•
But note that the right pedal has a right thread: to tighten it, it must always be turned to the right.
63L
Cr
Cr
#116 1X
13
43
63R
EN
DE
15
29