Sartorius Flexsafe Pro Mixer Drive Unit Instrucciones De Manejo página 28

Installation
Condition
Ambient conditions
Setup surface
Suitability of Palletank for Mixing and
®
mixing bag
28 Operating Instructions Flexsafe
5 Installation
5.1 Scope of Delivery
Item
Flexsafe Pro Mixer Drive Unit
®
Screw to replace the transport lock screw
Country-specific power supply cable (EU)
Country-specific power supply cable (USA)
Potential equalization cable, combined with power supply
cable and additional power supply plug
Operating instructions
Technical documentation
5.2 Unpacking the Device
Procedure
Unpack the device.
t
If the device is stored temporarily: Observe the storage information (see
t
Chapter "15.2 Ambient Conditions", page 57).
5.3 Prerequisites for Assembly at Installation
Site
Procedure
Make sure that the following conditions are met at the installation site:
t
Features
Suitability tested (see Chapter "15.2 Ambient Conditions", page 57)
− Stable and level surface
− Sufficient space for the device and for moving the device (see Chapter
"15.1 Dimensions and Weight", page 57 for required dimensions)
− Sufficient load-bearing capacity for the device and the peripheral
devices even when full (device weight see Chapter "15.1 Dimensions
and Weight", page 57; weight of the peripheral devices see
instructions for the peripheral devices, e.g. Palletank
The suitability of the Palletank
checked (suitability, see Chapter "6.1.2 Connecting the Power Supply
Cable", page 30).
Pro Mixer Drive Unit
®
®
for Mixing and mixing bags has been
®
Quantity
1
2
1
1
1
1
1
for Mixing)