Sartorius Flexsafe Pro Mixer Drive Unit Instrucciones De Manejo página 46

Operation
Access level: Admin
Manual mixing
DD.MM.YYYY HH:MM:SS
Separate motor
Lift down the motor by pressing the
arrow down button. Press the button
until the motor is positioned correctly
46 Operating Instructions Flexsafe
Procedure
Check the position of the motor in the "Separate motor" display.
t
The positioning bars must be in the top position (1).
Click on the [Lower] button and hold it down.
t
The device is disconnected from the Palletank
y
impeller in the mixing bag. During this process the distance sensor, the
alignment pins, and the motor are lowered into the starting position and
the device gives off acoustic signals.
8.12.2 Emptying and Removing the Mixing Bag
The mixing bag in the Palletank
removed from the Palletank
for Mixing).
8.12.3 Removing the Device from the Palletank
Requirements
The device is decoupled from the impeller and Palletank
WARNING
Risk of injury when removing the device from the Palletank
Ensure that there are no people in the operating area of the device or
t
the Palletank for Mixing.
®
CAUTION
Risk of crushing due to moving parts!
When removing the device from the Palletank
guide rollers glide over the guide rails of the Palletank
Do not reach into the area between the guide rollers and guide rails of
t
the Palletank for Mixing.
®
Ensure that there are no people in the operating area of the device who
t
can reach between the guide rollers and guide rails.
CAUTION
Trip hazard from connection cable!
While moving the device pay attention to where the connection cable is.
t
Pro Mixer Drive Unit
®
for Mixing and the
®
for Mixing needs to be emptied and
®
for Mixing (see instructions for the Palletank
®
for Mixing, the device's
®
®
for Mixing
®
for Mixing.
®
for Mixing!
®
for Mixing.
®